How do you Make a Lamp Out of a Wine Bottle? It's Easy!

June 14, 2015 1 Comment

How do you Make a Lamp Out of a Wine Bottle? It's Easy!

a

a

Wine bottle crafts are a dime a dozen, but few have as much potential for daily use as a table lamp. Bottles can be painted or etched, or if you're using a keepsake bottle from a special occasion (or just a brand of whiskey or bourbon that you love) you can keep the label on. It's also one of the easiest DIY projects out there. With the right supplies, it can take literally just a couple of minutes! I turned this sake bottle into a pretty blue table lamp - here's how I did it.

 

 

 

 

WHAT YOU'LL NEED

 

  • An empty glass bottle (wine bottle, liquor bottle, sparkling water bottle, etc. We used a sake bottle)

 

  • A Philips screwdriver

 

  • DIY Bottle Lamp Kit. This kit, available to buy in our Shop, is unique in that the socket is pre-wired: meaning that there's no wiring involved at all! Plus, it comes in a modern nickel/silver finish. The kit includes:

    • A threaded rod, AKA nipple
    • A washer and check ring
    • Rubber adapters
    • Complete wired socket with 8' cord and plug

 

HOW TO MAKE YOUR LAMP 

 

STEP ONE: CLEAN THE BOTTLE AND REMOVE THE LABEL

 

Remove all labels from your bottle of choice. We used Goof Off to get the job done fast, but you could also just soak the bottle in hot soapy water and peel the labels off.

 

Remove the cap and drain the bottle fully. Our bottle also had an additional metal ring which needed to be removed.

 

STEP TWO: ASSEMBLE THE SOCKET  

 

First, choose your adapter. Most bottle lamp kits come with one or several rubber adapters. Choose the adapter which fits best in the neck of your bottle. If the fit is not tight, you can later use super glue or hot glue to secure it properly.

 

 

 

 

 

 

Screw your chosen adapter onto the nipple, followed by the washer, exposing 1/4" of the nipple. Add the check ring (the disc which will cover the top of the bottle) atop the washer.

 

Loosen the set screw on the socket and screw it onto the 1/4" of an exposed nipple.

 

 

STEP THREE: INSERT THE ASSEMBLED SOCKET INTO THE BOTTLE'S NECK

 

 

 

 

Now you are ready to turn your bottle into a light fixture!

 

Place the socket into the opening of the bottle, using the rubber adapter to create a tight fit. Here is where you can add some super glue, or hot glue to provide additional strength.

 

Push the assembly down until only the socket cap is left showing.

 

 

 

 

That's it! Except for a bit of elbow grease that might be required to get the label off, this is a super simple project. The socket assembly takes less time to actually do than it takes to read all the instructions :)

 

The only thing left to do is create a matching lampshade for your bottle lamp!

 

Sign up for our newsletter below so you don't miss our next tutorial. We send a twice-monthly email with DIY lamp projects, new kits, and special offers.

 

 



1 Response

Linda
Linda

May 08, 2024

I’ ve got unlimited access to my husbands iPhone and PC and also have his activities in check thanks to this dude who is a Russian Hacker by his name Yuri I got introduced to from the UK who helped my friend boost her credit score. His assistance really meant a lot to me. I got access to my
husband’s cell phone, WhatsApp calls, without his knowledge with just his cell phone number this badass did everything remotely, I don’t know.if it’s right to post his contact but I promised him referrals, alot of fake ass out here, also someone might need his help so welp. I’m grateful to Yuri.
Email is wisetechacker @gmail com
Good work always speak for itself, you should contact him!’!!

Leave a comment